All Purpose Valve Soap Dispenser711
Features: Easy refill at top. Keyed lock filler cap. All mounting screws concealed. Lucite soap level indicator window.
Materials: Drawn and welded construction of 20 gauge stainless steel, type 304 brushed finish.
Dispensing: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions, and antiseptic soaps. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate, or chloride (CI or NaCI) based solutions. Please discuss with your janitorial supplier as to which type of PF neutral liquid soaps would be appropriate for this product. Prolonged exposure to these harmful chemicals may lead to discolouration and/or corrosion of the stainless steel and are not covered under warranty.
Capacity: 55 oz. capacity, (1.5 litre)
Weight: 2 lbs. (0.9 kg.)
Dimensions: 3.8″D x 7.38″W x 6.5″H
Installation: Secure mounting plate to wall through holes with three mounting screws provided. Slip dispenser over mounting plate and secure with single screw through filler cap at top.
Maintenance: We recommend that units be periodically rinsed out with warm water to prevent soap build up that may hinder the performance of the valve. Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.
Warranty: Frost Products Ltd warrants that if any Frost product or Frost product part proves to be defective within 12 months from the date of shipment from the factory it will be repaired or replaced without any charge when authorized. Frost warranty does not cover damaged product due to neglect or mishandling. Frost warranty does not cover installation or removal costs. Discolouration or corrosion caused by inappropriate soap usage or cleaning products are not included under this warranty.
*EXISTING CUSTOMERS ONLY